Instrument lighting dimmer

Press repeatedly or press and hold until the desired level is reached.
Note: In the uplevel message center only, a message will pop up that will show incrementally where the dimmer is in relation to the dimming steps. These steps will also vary for daytime and night time dimming.
Note: If the battery is disconnected, discharged, or a new battery is installed, the dimmer will set the illuminated components to the maximum setting automatically.
See also:
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after
the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must be done
withi ...
Safety Belt System
WARNING:
Always drive and ride with your seatback upright and the lap belt snug and low across
the hips.
WARNING:
To reduce the risk of injury, make sure children sit where they can be proper ...
Creating
Use the information display to create a MyKey.
1. Insert the key you want to program into the ignition. With a push-button start
(if equipped), put the Intelligent Access key in the backup slot; se ...
