Interior Lamps
Dome lamps and map lamps
The front dome lamp is located overhead between the driver and passenger seats.
• To manually turn on the dome lamp, rotate the panel dimmer control, located
on the instrument panel, to the full upright position past the detent.
• To turn off the dome lamp, rotate the panel dimmer control to the full down position
past the detent.

Note: When manually in the off position, the dome lamp will not illuminate when the door(s) are opened.
Map lamps (without moon roof)
The map lamp controls (without moon roof) are located on the dome lamp.
• Press the button on either side of each map lamp to illuminate the lamps.
• Press the button again to turn off the lamps.

Map lamps (with moon roof)
For models equipped with a moon roof, the map lamps are located on the moon roof control panel.
• Press the button on either side of each map lamp to illuminate the lamps.
• Press the button again to turn off the lamps.
Note: The dome lamp and map lamps are preset to illuminate when a door is opened and will remain on for 25 seconds after the door is closed.

Cargo and dome lamp
Rear cargo lamp equipped with an ON/OFF/DOOR control will light when:
• the doors are closed and the control is in the ON position.
• the control is in the DOOR position and any door is open.

When the control is in the OFF position, it will not illuminate when you open the doors.
Ambient lighting (if equipped)
Illuminates footwells, cupholders, the console bin and the console tray with a choice of several colors. The ambient lighting control switch is located on the floor console.
• To activate, press and release the control to cycle through the color choices plus the off state.

The lights come on whenever the ignition is in either the on or accessory position.
Note: The ambient lights will stay on until the ignition is placed in the off position and either of the front doors are opened or the accessory delay timer expires.
Interior lighting battery saver
The interior lamps will automatically extinguish after 10 minutes when the ignition key is in the off position, a door has been left open or the interior lamp controls are in the on position.
See also:
SecuriCode™ keyless entry keypad
You can use the keypad to:
• lock or unlock the doors
• recall memory features (if equipped)
• enable and disable autolock and autounlock
• program and erase user codes
• arm and disa ...
Safety seats for children
Infant and/or toddler seats
Use a safety seat that is recommended for the size and weight of the child.
When installing a child safety seat:
• Review and follow the information presented in the ...
Using snow chains
WARNING: Snow tires must be the same size, load index, speed rating as
those originally provided by Ford. Use of any tire or wheel not recommended by Ford
can affect the safety and performance of ...
