Bulb specification chart
Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.


See also:
Washer fluid check
WARNING: If you operate your vehicle in temperatures below 40°F (5°C),
use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze
protection in cold weather could r ...
Running out of fuel
If you have run out of fuel and need to refill the vehicle with a portable fuel
container, see Running out of fuel in the Maintenance and Specifications chapter
for proper fuel filling method usin ...
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after
the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must be done
withi ...
