Interior lamps
Dome Lamp Control
Without fog lamps

With fog lamps

Use to manually turn the dome lamp on.
• Press the control. This will turn on the interior courtesy lights.
The lights will remain on until the control is pressed again.
Front Row Map Lamps (If Equipped)
To turn on the map lamps, press the outer edge of the clear lens.
The front row map lamp lights when:

• any door is opened.
• the dome lamp button on the instrument panel is activated.
• the remote entry controls are pressed and the ignition is off.
Second row dome/map lamps (if equipped)

The dome lamp lights when:
• any door is opened.
• the instrument panel dimmer button is pressed until the courtesy lamps come on.
• any of the remote entry controls are pressed and the ignition is off.
The reading function can be turned on and off at the lamp with the left and right switches.
Second row dome/courtesy lamps (if equipped)

The dome lamp lights when:
• any door is opened.
• the instrument panel dimmer button is pressed until the courtesy lamps come on.
• any of the remote entry controls are pressed and the ignition is off.
The courtesy lamp can also be turned on and off manually by pressing the lens depression.
Third row cargo lamp

The dome lamp lights when:
• any door is opened.
• the instrument panel dimmer button is pressed until the courtesy lamp comes on.
• any of the remote entry controls are pressed and the ignition is off.
The courtesy lamp can also be turned on and off manually by pressing the control switch.
Battery saver
The battery saver will shut off the exterior lamps and interior lamps, except the hazard warning lamps if activated, 10 minutes after the ignition control has been turned off. The system will not turn off the parking lamps if the lighting control is in the parking lamps on position.
See also:
Auxiliary power point (12V DC)
Power outlets are designed for accessory plugs only. Do not insert any other
object in the power outlet as this will damage the outlet and blow the fuse. Do
not hang any type of accessory or acces ...
Starting
Positions of the ignition
1. Off— locks the gearshift lever and allows key removal. Note: In order to switch
off the engine while the vehicle is in motion, shift to neutral and use the brakes
...
Brakes
GENERAL INFORMATION
Note: Occasional brake noise is normal. If a metal-to-metal, continuous
grinding or continuous squeal sound is present, the brake linings may be worn out
and should be inspect ...
