Vehicle certification label

The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch, next to the driver’s seating position.
See also:
Keys and Remote Control
PRINCIPLE OF OPERATION
The remote control allows you to:
• remotely lock or unlock the vehicle doors
• unlock the doors without actively using a key or remote control (intelligent access
only ...
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after
the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must be done
withi ...
Transmission code designations
You can find a transmission code on the Safety Compliance Certification Label.
The following table tells you which transmission each code represents.
...
