Rear-window wiper and washer

Rotate the control to select:
2 — Intermittent operation (shortest pause between wipes).
1 — Intermittent operation (longest pause between wipes).
0 — Off.
Rotate and hold the control to either the top or bottom position to activate the rear washer. The control will return to the 2 or 0 position when you release it.
When you select reverse gear, the rear wiper will switch on to intermittent if the front wipers are activated. This feature may be enabled or disabled in the information display.
See also:
Collision warning system
WARNING: This system is designed to be a supplementary driving aid. It
is not intended to replace the driver’s attention, and judgment, or the need to
apply the brakes. This system does NOT acti ...
MyFord Touch® (If Equipped)
INTRODUCTION
WARNING: Driving while distracted can result in loss of vehicle control,
accident and injury. Ford strongly recommends that drivers use extreme caution when
using any device or featu ...
Cabin air filter
Note: A cabin air filter must be installed at all times to prevent foreign
objects from entering the system. Running the system without a filter in place could
result in degradation or damage to t ...
