Brake/Clutch fluid
Brake and clutch (if equipped) systems are supplied from the same reservoir.
The fluid level will drop slowly as the brakes wear, and will rise when the brake components are replaced. Fluid levels between the MIN and MAX lines are within the normal operating range; there is no need to add fluid.
If the fluid levels are outside of the normal operating range, the performance of the system could be compromised; seek service from your authorized dealer immediately.
See also:
Aluminum wheels and wheel covers
Aluminum wheels and wheel covers are coated with a clear coat paint finish. In
order to maintain their shine:
• Clean weekly with Motorcraft Wheel and Tire Cleaner, which is available from
your ...
Brakes
GENERAL INFORMATION
Note: Occasional brake noise is normal. If a metal-to-metal, continuous
grinding or continuous squeal sound is present, the brake linings may be worn out
and should be inspect ...
Steering
To help prevent damage to the power steering system:
• Never hold the steering wheel at its furthest turning points (until it stops)
for more than three to five seconds while the engine is runnin ...