Parking brake
WARNING: If the parking brake is fully released, but the brake warning lamp remains illuminated, then driving the vehicle could result in reduced braking ability, increased stopping distances and potential loss of brakes. See your authorized dealer as soon as possible.
WARNING: Always set the parking brake fully and make sure that the transmission selector lever is securely latched in position P. Failure to set the parking brake and engage park could result in vehicle roll-away, property damage or bodily injury.
To set the parking brake, press the parking brake pedal down to its fullest extent.
To release the parking brake, press the parking brake pedal down again.
See also:
Vehicle identification number
The vehicle identification number is located on the driver’s side instrument
panel.
Please note that in the graphic, XXXX is representative of your vehicle identification
number.
The Vehicle ...
Headlamp exit delay
You can set the delay time to keep the headlamps on for up to three minutes after
the ignition is turned off.
Follow the steps below to change the delay time (Steps 1 through 6 must be done
withi ...
Manual transmission operation (if equipped)
Using the clutch
Manual transmission vehicles have a starter interlock that prevents cranking
the engine unless the clutch pedal is fully pressed.
To start the vehicle:
1. Make sure the parking b ...