Hazard warning flashers
The hazard flasher control is located on the instrument panel by the radio. Use it when your vehicle is disabled and is creating a safety hazard for other motorist.
• Press the flasher control and all front and rear direction signals will flash.
• Press the flasher control again to turn them off.
Note: With extended use, the flasher may run down your battery.
Vehicles equipped with MyTouch
• Press and hold the flasher control and all front and rear direction signals
will flash.
• Press and hold the flasher control again to turn them off.
Note: With extended use, the flasher may run down your battery.
See also:
Car2U® home automation system
WARNING: Make sure that the garage door and security device are free from
obstruction when you are programming. Do not program the system with the vehicle
in the garage.
WARNING: Do not use the s ...
Technical specifications
Wheel Lug Nut Torque Specifications
WARNING: When a wheel is installed, always remove any corrosion, dirt
or foreign materials present on the mounting surfaces of the wheel or the surface
of the ...
Air filter
Refer to scheduled maintenance information for the appropriate intervals for
changing the air filter element.
When changing the air filter element, use only the air filter element listed.
Refer t ...