Technical specifications
Wheel lug nut torque
WARNING: When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while the vehicle is in motion, resulting in loss of control.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as rotation, flat tire, wheel removal).
Note: Inspect the wheel pilot hole and mounting surface prior to installation. Remove any visible corrosion or loose particles.
See also:
Moonroof
WARNING: Do not let children play with the panoramic Vista Roof® and power
sunshade or leave children unattended in the vehicle. They may seriously hurt themselves.
WARNING: When closing the panor ...
Bulb specification chart
Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked
with an authorized “D.O.T.” for North America and an “E” for Europe to ensure lamp
performance, light brig ...
Brakes
GENERAL INFORMATION
Note: Occasional brake noise is normal. If a metal-to-metal, continuous
grinding or continuous squeal sound is present, the brake linings may be worn out
and should be inspect ...