Fuses and relays
Fuses
If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.
Note: Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.
Standard fuse amperage rating and color
Passenger compartment fuse panel
The fuse panel is located on the right-hand side of the center console, by the instrument panel.
Remove the panel cover to access the fuse cover. Press the tabs on the top and bottom of the fuse cover to remove.
The fuses are coded as follows
Power distribution box
The power distribution box is located in the engine compartment. Refer to the Identifying components in the engine compartment section of the Maintenance and Specifications chapter for the location. The power distribution box contains high-current fuses that protect your vehicle’s main electrical systems from overloads.
WARNING:
Always disconnect the battery before servicing high current fuses.
WARNING:
To reduce risk of electrical shock, always replace the cover to the Power Distribution
Box before reconnecting the battery or refilling fluid reservoirs.
The high-current fuses are coded as follows.
See also:
MyKey
PRINCIPLES OF OPERATION
MyKey® allows you to program keys with restricted driving modes to promote good
driving habits. All but one of the keys programmed to the vehicle can be activated
with th ...
Refueling
WARNING: Fuel vapor burns violently and a fuel fire can cause severe injuries.
To help avoid injuries to you and others:
• Read and follow all the instructions on the pump island;
• Turn off y ...
Data recording
Service Data Recording
Service data recorders in your vehicle are capable of collecting and storing
diagnostic information about your vehicle. This potentially includes information
about the perf ...